Specifications of Stayfit- 10 Station Multi Gym
Frame construction: Primary
frame constructed of 2”x 2” Rectangular steel tubing gauge 10, Other sizes are also used in support.
·
Bent Tube: Primary
frame constructed of bent steel tubing to increase load-bearing capacity, while
maintaining or enhancing aesthetic quality.
·
Fabrication: All
joints are beveled half the thickness of the metal before being welded.
Sub-frames are bolted together and can be disassembled to aid in installation.
·
Frame Finish: Steel
surface is chemically etched and then coated with powder- coat paint and baked
at 200 degrees.
·
Seat Adjustment: Easy-Adjustment
seat system allows operating easily to your comfortable exercise position. The
chromed telescoping tubing is sleeved with smooth Glide inserts to eliminate
metal-to-metal contact and provide friction-free adjustments.
·
Upholstery: commercial
grade fabric and double stitched.
·
Foam Padding: 1-1/2”
thick, low density foam.
·
Bearing: Sealed
ball-bearings are used on all exercise pivot mechanisms.
·
Handgrips: High-density
closed end rubber handgrips.
·
Footpads: Rubber
footpads are standard on all equipment to ensure stationary placement on the
exercise floor.
·
Hardware: Bolts
grade are as per load bearing requirements.
·
Weight Plates: Precision
finished weight stacks are made of solid Mild Steel with Powder coated finish
and constructed with bushings in each plate. Bushings provide a dry,
friction-free surface between weight plates and guide rods.
·
Self-Aligning Guide Rods: 19mm Guide
Rod are free-floating so they will self-align during weight stack travel. The
free-floating ends rest in bushings to prevent metal-to-metal contact and
eliminate noise.
·
User Accessible Weight stacks: All
weight stacks are within easy reach of the exercise position.